When using FlashPrint 5 for the first time, simply select the corresponding printer type to quickly access the software.
You can quickly find the sample models in STL format we have prepared for you via [File] – [Examples]; for example, a small cube is shown below.
If you want to quickly slice a model in STL format into a format recognizable by the printer, first ensure the printer type at the bottom left of the interface is correct (if incorrect, click [Machine Type] at the bottom left to choose the right one), click [Start Slicing] and then select the nozzle size and material type for rapid slicing.
After finishing slicing, there are two ways to print the model.
1. Export the model to a USB flash drive and plug it into the printer’s USB port for direct printing.
2. Connect FlashPrint 5 to your printer and remotely send the model to the printer for printing (please ensure your computer and printer are connected to the same network).
Updated on 31 Aug 2024
